BQTHD - AMERGUARD, 220

Product Identification

Product ID:AMERGUARD, 220
MSDS Date:03/27/1992
FSC:8010
NIIN:00N036346
MSDS Number: BQTHD

Responsible Party
AMERON PROTECTIVE COATINGS
201 NORTH BERRY ST
BREA, CA 92622-1020
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 714-529-1951

Preparer: H. KLINE

Cage: 0Y2E4

Contractor
AMERON PROTECTIVE COATINGS
1020 BREA, CA 92622-1020 US

Telephone: 714-529-1951

Cage: 0Y2E4

Ingredients

(ORAL,RAT)>10 G/KG

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: <5%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293


CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: <5%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3


PHTHALIC ACID, DIBUTYL ESTER; (DIBUTYL PHTHALATE). VP

CAS: 84-74-2

RTECS: TI0875000

Fraction By Weight: <5%

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS


(ORAL,RAT)10

CAS: 2786-76-7

Fraction By Weight: <5%


BLUE PIGMENT; (COPPER PHTHALOCYANINE)

CAS: 147-14-8

Fraction By Weight: <5%


(ORAL,RAT)>5 G/KG

Fraction By Weight: <35%


17@68F.

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: <20%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


ETHANOL, 2-(2-METHOXYETHOXY)-; (2-2(METHOXYETHOXY)

CAS: 111-77-3

RTECS: KL6125000

Fraction By Weight: 6.89%


PROPIONIC ACID, 2-METHYL-, MONOESTER

CAS: 25265-77-4

RTECS: UF6000000


(ORAL,RAT)3.2 G/KG

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:SEE INGREDIENTS
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:VAP/SPRAY MIST CAN BE HARMFUL.
IRRITATING TO EYES, SKIN, NOSE & THROAT. EXCESSIVE INHAL CAN CAUSE
HDCH, NAUS/DIZZ. RPTD & PRLNGD OCCUP OVEREXP TO SOLV W/PERM BRAIN &
NERV SYS DAM. CAN BE HARMFUL IF SWALLOWED. CAN BE HARMFUL IF
INHALED. CAN BE HARMFUL IF INHALED/ABSORBED THRU SKIN. OVEREXP CAN
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: CAUSE DELAY LUNG INJURY.
Medical Cond Aggravated by Exposure:RESPIRATORY.

First Aid

First Aid:INHAL: PROVIDE FRESH AIR; IF BRTHG LABORED, GIVE OXYGEN/ARTF
RESP. SKIN: WASH THORO W/SOAP/WATER. EYES: FLUSH IMMED W/PLENTY OF
WATER FOR @ LST 15 MIN & GET MED ATTN. INGES: DRINK 1-2 GLASSES OF
WATER TO DILUTE. DO NOT INDUCE VOMITING. CONSULT PHYS/POISON
CONTROL CENTER IMMEDIATELY. TREAT SYMPTOMATICALLY.

Fire Fighting

Flash Point Method:SCC
Flash Point:>200F,>93C
Lower Limits:0.47%
Upper Limits:9.50%
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . WATER MAY BE USED TO COOL CLOSED CONTAINERS
TO PREVENT STEAM BUILDUP.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:AVOID BREATHING OF VAPORS. USE ABSORBENT
CLEANUP MATERIALS. PLACE IN SEPARATE CONTAINER. KEEP OUT OF SEWERS
AND WATERWAYS. IF ENTRY IS THREATENED/OCCURS, NOTIFY LOCAL
AUTHORITIES. ELIMINATE ALL SOUSRC ES OF IGNITION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTR CLSD, UPRIGHT WHEN NOT IN
USE. STORE IN COOL, DRY, WELL-VENTD AREA. AVOID STOR TEMP ABOVE
100F. DO NOT ALLOW TO FREEZE.
Other Precautions:PROTECT FROM FREEZING. DO NOT TAKE INTERNALLY. AVOID
PROLONGED BREATHING OF VAPORS/SPRAY MIST OR CONTACT W/SKIN/EYES.
GROUND CONTAINERS WHEN POURING.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPRVD CERTIFIED RESP. FOR SPEC
CNDTNS, REFER TO CURRENT NIOSH POCKET GUIDE TO CHEM HAZ. USE
NIOSH/MSHA APPRVD AIR-LINE RESP IN CONFINED/RESTRICTED VENT AREAS.
REFER TO 29CFR, OSHA PARTS 19 10 & 1915, FOR COATING OPERATIONS.
Ventilation:SUFFICIENT VENT, IN VOL & PATTERN, SHOULD BE PROVIDED TO
KEEP AIR CONTAM CONC BELOW TLV LIM. REMOVE WELD/ (SUPP DATA)
Protective Gloves:NEOPRENE.
Eye Protection:CHEM WORK GOG OR FULL LNGTH FSHLD.
Other Protective Equipment:FULL PROTECTIVE CLOTHING.
Work Hygienic Practices:WASH THORO BEFORE EATING, SMOKING/USING
WASHROOM. LAUNDER CONTAMD CLTHG BEFORE REUSE.
Supplemental Safety and Health
EVAP RATE: LOW: 0.01; HIGH: 0.01. VENT: FLAME CUTTING DECOMP PROD.
REFER TO 29 CFR, OSHA PARTS 1910 & 1915, FOR COATING OPERATIONS.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SUPP DATA
Solubility in Water:SOME
Appearance and Odor:LIQUID, SOLVENT ODOR.
Percent Volatiles by Volume:67

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, ALKALIES. ELEVATED TEMPERATURES.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:BURNING/WELDING: CARBON MONOXIDE &
CARBON DIOXIDE, OXIDES OF NITROGEN. IRON OXIDE FUMES, ACRYLIC
MONOMER FUMES.

Disposal

Waste Disposal Methods:IN SEPARATE, CLOSED METAL CONTAINER I/A/W ALL
FEDERAL, STATE AND LOCAL APPLICABLE REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.